Once that’s all complete, you’ll see the DS4Windows main window now looks like this and contains your new controller: You’ll see a few notifications pop up regarding installation of various controller drivers for this newly found controller. After this, DS4Windows will ensure the proper drivers are loaded for this controller. It should show up as ‘Wireless Controller’. From here you should see a window like so:Ĭlick on Bluetooth type devices and make sure the controller is in pairing mode. Make sure Bluetooth is enabled on your computer. Once you click on Bluetooth Settings, you should see a window appear like: If you’ve chosen Bluetooth, then change settings by clicking the ‘Bluetooth Settings’ button and connect the controller to Windows through Windows’s control panel settings. If you intend to use the controller wirelessly, then follow the (optional) Bluetooth instructions at the bottom of the window above. If you have a USB cable, then follow the instructions at the top of the red box. Skip this step on Windows 10.įrom here, you’ll need to choose if you’re going to use this controller via USB cable or via Bluetooth. Step 2: Install the 360 driver (only needed if Windows 7 or below). Step 1: Install the DS4 Driver - Click the Button highlighted in red Once you run DS4Windows, you should see a window that looks like this: There’s no way around this issue because this developer has chosen not to code sign this application. Note, Windows may warn you that this application is from an unknown developer, be sure to click ‘Run Anyway’. If you’re running 32 bit Windows, choose the x86 version.Īfter you download it, you’ll extract out the zip file which contains the following files:įrom here, double-click the DS4Windows application icon. If you’re running 64 bit Windows, download the 圆4 version. However, if you’re reading this 6 months from now or later, it will likely have changed. As I write this article, that number is version 1.4.119. To download the latest version of DS4Windows click through to this link:Ĭhoose the top most release number. If you have previously used a 360 controller or you are using Windows 8 or above, you can skip that installation step. As you’ll note, you’ll need to install the Microsoft 360 Driver if you’ve never used a 360 controller on Windows. This driver works by latching onto the Xbox 360 controller emulation system that’s available as an add-on in Windows 7 or newer. (Optional) Bluetooth 2.1+, via adapter or built in pc (My recommendation) (Toshiba’s bluetooth adapters currently do not work).Sony DualShock 4 (This should be obvious).Microsoft 360 Driver (link inside DS4Windows, already installed on Windows 7 SP1 and higher or if you’ve used a 360 controller before).SCP Virtual Bus Driver (Downloaded & Installed with DS4Windows).NET 4.5.2 or higher (needed to unzip the driver and for macros to work properly) This version is being updated constantly. You’ll want to get this newer version from Ryochan4. One by Jay2Kings which has been abandoned and a newer fork being handled by Ryochan4. Note that there are two releases of DS4Windows. You’ll need to download DS4Windows for your system. Since that pairing article shows you how to pair a DS4, this article will show you how to make use of it on Windows. The lightbar will begin to double flash, select it in bluetooth devices on your pc and done.In a follow-up to the Randocity article How to pair your PS4 controller wirelessly, this article is an extension to explain how to pair a DualShock 4 controller to Windows via Bluetooth. To connect it through Bluetooth, Hold the PS Button and Share for 3 Seconds.To connect it through USB, plugin the Micro-USB Cable to your PC and PS 3/4/5 Controller.After the above steps are finished, you can Connect the DualShock 4 Controller or Dualsense Controller to PC using Bluetooth or Wired Connection (ex:- USB connection).Only for Windows 7 Users: You need to install 360 Driver.It says that, you need to install ViGEmBus Driver as your first step.If you come across any “Windows Protected Your PC” screen while launching it, hit “Run anyway” button and you are done. It is a standalone software you do not need to install it on your pc. Double tap the DS4Windows.exe file as highlighted in the above image.You will probably see a full list of files such as in the below image.Extract the DS4Windows_3.3.3_圆4.zip file to a folder using winrar or 7zip tool.If you have downloaded the tool and the drivers such as ViGEmBus Driver, 360 Driver (for Windows 7 users), HidHide Driver, FakerInput Driver, let’s get started with the installation procedure.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |